This online shop is using cookies to give you the best shopping expierience. Thereby for example the session information or language setting are stored on your computer. Without cookies the range of the online shop's functionality is limited. If you do not agree, please click here.

Tube stub reduced

SO 21300 RED
Type (Cust.) Art. no. Ad L1 L2 D e kg/100 CAD
Type SO 21300-6-A4 RED Art. no. 126.1304.110 Ad 4 L1 29.0 L2 15.0 D 8.6 e 2.0 kg/100 0.083 CAD Link
piece
Type SO 21300-8-A6 RED Art. no. 126.1304.140 Ad 6 L1 30.0 L2 15.0 D 10.6 e 4.0 kg/100 0.125 CAD Link
piece
Type SO 21300-10-A6 RED Art. no. 126.1304.175 Ad 6 L1 35.0 L2 15.0 D 12.6 e 4.0 kg/100 0.177 CAD Link
piece
Type SO 21300-10-A8 RED Art. no. 126.1304.190 Ad 8 L1 35.0 L2 15.0 D 12.6 e 6.0 kg/100 0.194 CAD Link
piece
Type SO 21300-12-A8 RED Art. no. 126.1304.225 Ad 8 L1 39.0 L2 19.0 D 14.6 e 6.0 kg/100 0.239 CAD Link
piece
Type SO 21300-12-A10 RED Art. no. 126.1304.240 Ad 10 L1 39.0 L2 19.0 D 14.6 e 8.0 kg/100 0.260 CAD Link
piece
Type SO 21300-12/9-A10 RED Art. no. 126.1304.272 Ad 10 L1 39.0 L2 19.0 D 14.6 e 8.0 kg/100 0.312 CAD Link
piece
Type SO 21300-16/13-A12 RED Art. no. 126.1304.480 Ad 12 L1 50.0 L2 25.0 D 19.7 e 10.0 kg/100 0.556 CAD Link
piece

Tube stub reduced

SO Code: -
Art. no.: -

Technical details

d = Tube outside diam. / with wall thickness 1 mm Ad = Outside diameter of cyl. stub e = Minimum bore
Tube stub reduced
+ = higher pressure on request
If the tube stubs are coupled with a union nut and a nut connection (union nut and compression ferrule), an adjustable union is produced.

Assembly information: Tighten the union nut on the side of the turned compression ferrule (left in pict.) with 1/4 turn. Tighten the union nut on the other side (right in pict.) 1 3/4 turns.
With the adjustable union, parts with the same connecting thread can be connected.
Tube stub reduced
+ = higher pressure on request
If the tube stubs are coupled with a union nut and a nut connection (union nut and compression ferrule), an adjustable union is produced.

Assembly information: Tighten the union nut on the side of the turned compression ferrule (left in pict.) with 1/4 turn. Tighten the union nut on the other side (right in pict.) 1 3/4 turns.
With the adjustable union, parts with the same connecting thread can be connected.